Anviz Web Portal: Anleitung für den erzwungenen Firmware-Aktualisierungsmodus

Forced Firmware Upgrade Mode via Anviz Web Portal

Please follow the below steps to upgrade your Anviz terminal firmware in forced upgrade mode via the Anviz Web Portal:

• Open a web browser on the same network as the terminal and and type in the assigned terminal IP address (e.g. 192.168.1.245)
• This should bring up the following screen:

• Sign into the web portal. The default login is:

Username: Admin

Password: 12345

• Once logged in, check the address bar. It should look like this:

• Delete everything after html#/ and replace with UP so it looks like this:

• Press enter and the forced upgrade login screen will appear
• You can then enter IN12345OUT as the password to activate the forced upgrade mode, as shown below:

• Klicken SetMode and the screen will display ‘success’, as below:

• Now delete UP from the url and hit the enter key on your keyboard. This will return you to the terminals Web Portal page
• Go to the Advanced Setup > Firmware upgrade setting
• Select the .aup firmware file given to you by Idency (Hier klicken to request .aup firmware file) and click Aktualisieren
• The process will start a 30 second countdown where the terminal will restart and apply the update (do not refresh the page while this is happening)
• Once the countdown has finished, login to the web portal again, you may need to refresh the page
• Go to the Basic Setup menu and check the system information. You will see the firmware version has changed, as below:

Benötigen Sie weitere Unterstützung?

Alle durchsuchen Wissensdatenbank Artikel

Sende eine Support-Anfrage An das Idency-Support-Team